HPI Baja 5B SS 1/5 Gas Buggy Kit HPI112457

More information about HPI Baja 5B SS 1/5 Gas Buggy Kit HPI112457

This is the HPI Baja 5B SS 1/5 Scale 2WD Gas Buggy Kit. The 1/5th scale Baja 5B desert racing buggy has been a huge success since its debut and the self-build Baja 5B SS helped explode large-scale racing into the mainstream because it allows serious RC fans the chance to build and optimize a large-scale buggy from the ground up. Loaded with options that enhance the Baja’s speed and power, the ‘SS’ version allows serious RC hobbyists the chance to add in more aftermarket goodies to make a truly one-of-a-kind Baja 5B.

Now you can get your hands on the new, updated for 2014 Baja 5B SS! This is a FULL OPTION Baja 5B kit that you assemble yourself, and now we’ve improved its durability even further with Super Heavy Duty options previously unavailable on Baja buggy models!

The Baja SS is an epic member of HPI’s range of upgraded ‘Super Sport’ models that feature kit versions of HPI’s popular RTR models, with additional option parts added to enhance the enjoyment of your kit. A long list of option parts is included with the SS version of the Baja 5B. As you build the kit, you add in the options that come in the box, extra HPI options, and your own radio gear and electronics – although we include the powerful SFL-10MG large scale metal-gear servo to get you started!


HPI Baja 5B SS kit


steering servo

2oz (60cc) shock oil

1oz (30cc) diff oil

1oz (30cc) air filter oil

Tube of gear grease



Extra air filter


Decal sheet

Illustrated instruction manual

3.4oz (100cc) Z191 2-cycle oil


Radio: 2-3 ch FM or 2.4GHz with standard size servo for throttle (do not use AM radio)

Receiver Battery: 6V hump configuration, at least 3000mAh

Battery Charger: Timed or peak for receiver pack

Unleaded Gasoline: 87-93 octane, mix gasoline and two cycle oil at 25:1 ratio

Transmitter Batteries: AA, number depends on selected transmitter

Paint: Spray or brush-on for polycarbonate bodies

Building and track equipment


Chassis: Narrow channel monocoque design 0.16″ (4mm) thick, gun-metal gray in color, constructed of aircraft grade 6061 T6 aluminum, side guards protect engine from dirt and debris

Drive: Rear wheel gear drive with heavy duty dogbones

Engine: Fuelie 26S gas engine with pull starter, quick release foam air filter, primer, choke and kill switch

Steering servo: SFL-11MG Servo, metal gear/24.7kg-cm6.0Vg

Ball Bearings: Full set included

Shocks: Four VVC heavy duty aluminum shocks with 5 externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces, modified rear shock tower brace

Main Gear: 57 tooth composite construction

Gearbox: Sealed, heavy duty metal gears

Differential: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears, aluminum alloy diff case

Brakes: Ventilated dual disc

Clutch: 2-shoe, 8000 RPM

Gas Tank: 25.3oz (750cc)

Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4″ (60mm) wide, 6.7″ (170mm) outer diameter

Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1″ (80mm) wide, 6.7″ (170mm) outer diameter

Wheels: Black 5-spoke, nylon 3-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue

Body: Clear pre-cut

Rear Wing: Molded black plastic with decals applied

Roll Cage: Baja style high impact nylon protects engine and body from crash damage

Suspension: Fully adjustable, long travel double wishbone

Caster: Adjustable, with shims 22 / 25.5* stock / 29 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle



Length: 32.2″ (817mm)

Front Width: 18.1″ (460mm)

Rear Width: 18.9″ (480mm)

Height: 10″ (255mm) with 1G, 11″ (280mm) with 0G

Ride Height: 3″ (76mm)

Suspension Travel: Front 3.7″ (95mm), Rear 3.9″ (100mm)

Weight: 21.3lbs (9.6kg) without fuel

Wheelbase: 22.4″ (570mm) wheels on-center front-to-rear

Front Track: 15.5″ (395mm)

Rear Track: 15.7″ (400mm) outer edges of wheels

Gear Ratio: 8.382:1


Front: 2.4″ (60mm) x 6.7″ (170mm)

Rear: 3.1″ (80mm) x 6.7″ (170mm)


Length: 22.9″ (581mm)

Width: 8.8″ (224mm) at rear wheels (widest point), 3.25″ (82mm) ahead of front wheels (thinnest point)

Height: 4.75″ (121mm) at highest point

Payment Method : T/T, Paypal, Western Union

My URL Website product : https://shoptoyspromo.com/product/hpi-baja-5b-ss-1-5-gas-buggy-kit-hpi112457/

Shipment Method: Pick up or Ship
Condition: New
Dates Available (OPTIONAL): Jan 27, 2019
Listing created Jan 28, 2019

Public discussion (0)

You must log in to send a new comment.